sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 cat 6 data wiring system connectors tm23 series 2008.4 w features 1. high-speed data transfer conforms to the tia/eia-568b.2-1 data wiring standard, thereby clears cat 6 transfer performance requirements. as such, these products easily support gigabit ethernet (1000base-t/1000base-tx), which is the next generation of high-speed applications. 2. a product lineup focused on building of a complete system in addition to modular plugs, hirose electric offers box type outlets, patch panels, and wall outlets. systems built using all components from the same manufacturer will assure stable data transfer. 3. support of a wide variety of manufacturers' cat 6 cable to assure high performance of the system we test and monitor data transfer using cat 6 cables manufactured by different suppliers. 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value measured value measured value cat 6 attenuation standard value cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value permanent link psacr frequency (mhz) tm23 series cat 6 data wiring system connectors 2 100 m ohms min. no flashover or insulation breakdown. 230 m ohms max. no electrical discontinuity of 5s min. contact resistance : 250m ohms max. no electrical discontinuity of 5s. min. contact resistance : 250m ohms max. contact resistance : 250m ohms max. contact resistance : 250 m ohms max. insulation resistance : 100 m ohms min. contact resistance: 250 m ohms max. insulation resistance: 1 m ohms min. (high humidity) insulation resistance: 100 m ohms min. (dry state) contact resistance: 250 m ohms max. 100 v dc 500 v ac / one minute 100ma frequency: 10 to 55 hz, single amplitude of 0.75 mm, 1 octave/min. conduct, 10 cycles to each 3 directions. acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 6 axes. 200 cycles temperature : -553? ? +15? to +35? ? +852? ? +15? to +35? duration (minutes) : 30 ? 2 to 3 ? 30 ? 2 to 3 5 cycles 500 hours at temperature of 40 ? and humidity of 90% to 95%. 5% salt water/48 hours. 1. insulation resistance 2. withstanding voltage (between adjacent contacts) 3. contact resistance 4. vibration 5. shock 6. durability (mating/un-mating) 7. temperature cycle 8. humidity 9. salt spray rating current rating 1a voltage rating 125v ac operating temperature range -25 ? to +60 ? (note) plugs, boots specifications materials and finishes item specification conditions insulator contacts strain relief clamp polycarbonate phosphor bronze brass color: clear contact area: gold plated nickel plated ul94v-0 ------------------- ------------------- component plugs material finish remarks insulator eptr white (standard color) black, red, blue, yellow, green, orange, gray, light blue ul94v-0 ------------------- component boots material finish remarks note: includes temperature rise caused by current flow. ordering information plugs series name : tm23 connector type p : plug size 8 : 8 contacts inserted contacts 8p : 8 contacts 1 2 3 8p 8 - p - tm23 4 1 2 3 4 boots series name : tm23 connector type p : plug size 8 : 8 contacts bt : boot 1 2 3 bt 8 - p - tm23 4 1 2 3 4 +5 0 +5 0 jacks series name : tm23 connector type r : jack mounting style/termination type 5a : right-angle/through hole jack opening code 8 : for 8 contacts number of inserted contacts 8 : 8 contacts 1 2 3 4 5 8 8 5a - r tm23 1 2 3 4 5 3 tm23 series cat 6 data wiring system connectors plugs part no. tm23p-88p 222-2916-6 yes cl no. rohs tm23p-88p c6 1 (25) 24 5.4 10.05 10.05 6 17 (17.5) contact no. 1 connecter guide insert (shown inserted) contact no. 8 11.7 5.05 (12.9) 8.9 6.6 6.09 4.75 plug body connector guide insert * strain relief clamp * (15.45) b overview . contact configured for cat 6 performance. . 0.5 mm dia. solid wire or awg #24 stranded wire. . use with cables having external diameters of 5.4 mm to 6.8mm. . strain relief clamp protects the contact/conductor termination areas. b mated with corresponding receptacle (shown for reference only) * supplied separately(1bag contains 1pcs.) tm23 series cat 6 data wiring system connectors 4 boots part number cl no. color rohs TM23P-8-BT (01) TM23P-8-BT(01) TM23P-8-BT(02) TM23P-8-BT(03) TM23P-8-BT(04) TM23P-8-BT(05) TM23P-8-BT(06) TM23P-8-BT(07) TM23P-8-BT(08) 222-2917-9 -02 222-2917-9-01 222-2917-9-02 222-2917-9-03 222-2917-9-04 222-2917-9-05 222-2917-9-06 222-2917-9-07 222-2917-9-08 white black red blue yellow green orange gray light blue yes TM23P-8-BT 1 12 13.4 (12) (4) 25.3 (17.2) (16.9) 10.8 10.8 8.8 (6.5) ?6.8 (40) tm23p-88p protected lock/release lever ?6.8max b overview . dedicated boots for the tm23p-88p. . 9 color variations. . halogen-free. . protects the plugs lock/release lever. b boot installed 5 tm23 series cat 6 data wiring system connectors manual termination tool note: to achieve cat 6 performance, refer to tm23p-88p cable termination procedure manual(etad-e2415). solid copper conductor: 0.5mm dia. stranded copper conductor: awg#24 (0.95mm to 1.05mm) (5.4mm to 6.8mm) conductor individual conductor insulation dia. overall jacket dia. filler conductor insulation jacket recommended cable specification hrs marking side (for contact/conductor termination) a reverse side (for cable strain relief clamp crimping) part no. ht601-tm23/22p-88p 902-2128-1 cl no. * changing the a assembly parts to tm22 dedicated clamp parts will allow wiring of hiroses tm22p-88p plugs supporting cat 5e. body applicator item automatic contact termination machine cm-105 ap105-tm23p-88p part number cl901-0005-4 cl901-2588-5 cl no. cable strain relief clamp crimping jig (manual operated) tm23p-88p/ck-mp(01) part number cl902-2130-3(01) cl no. 6 tm23 series cat 6 data wiring system connectors note: the jack by itself does not clear cat 6 performance requirements. compensation on the board is required to secure cat 6 performance. jacks part number cl no. color rohs tm23r-5a-88(50) 222-2918-1-50 black yes b overview . unique contact structure designed for crosstalk reduction. . (through hole : 3 rows) . temporary retention to board with integral flexible posts. b pcb mounting pattern 1 2 3 4 5 6 7 8 15 6 connector front edge 1.016 3.048 5.08 7.112 1.3 2.54 4 recommended board thickness: 1.6mm 8-?0.8 2-?2.4 15 15 14.5 6 13 contact no. 8 contact no. 1 flexible post 0.43 4 2.54 1.3 3 2.1 0.35 7 tm23 series cat 6 data wiring system connectors precautions in system construction the tm23 series connector and components were designed for cat 6 data transfer. however, it is highly recommended that the entire connected system be checked for this performance level. cable termination procedures manufacturer's name web site hitachi cable, ltd. http://www.hitachi-cable.co.jp/index_e.html tonichi kyosan cable, ltd. http://www.tonichi-kyosan.co.jp/ nipponseisen co. ltd. http://www.nscable.co.jp/ okano electric wire co., ltd. http://www.okano-cable.co.jp/english/index.html tsushin kogyo k.k. http://www.tsuko.co.jp/ showa electric wire & cable co., ltd. http://www.swcc.co.jp/eng/index.html fuji electric cable co, ltd. http://www.tokyo-fuji.co.jp/index_f.htm recommended cable manufacturers hirose electric closely examines the transfer performance of these connectors with the cat 6 cable that is manufactured and sold by the various cable manufacturers. please use the cable from among those indicated in table 1 for system construction with the tm23 series. use of different manufacturers' components use of different manufacturers' components in one system could cause the deterioration of transfer performance. check of the system performance verification all measures have been taken to assure the transfer performance of the tm23 series. however, it is highly recommended to verify transfer performance of complete system using commercially available measuring instruments. hirose electric does not build wiring systems. please contact hirose electric sales representative for system construction contractor information. note: please see the web sites of the various manufacturers for cable specifications. contact hrs for recommendations when using cables from other suppliers. table1 recommended cable manufacturers cable termination procedure manual no. etad-e2415 tm23p-88p part number 8 tm23 series cat 6 data wiring system connectors dsp4300 main unit dsp4300 remote unit permanent link adapter (pm06) horizontal cable 90 m tm23r-mpp24 tm23r-t01 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value measured value measured value cat 6 attenuation standard value cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value . permanent links permanent link psacr frequency (mhz) dsp4300 main unit channel link adapter dsp4300 remote unit horizontal cable 90 m tm23r-mpp24 stranded wire 3 m patch cable 2 m tm23r-t01 ( :tm23p-88p) patch cable 5 m cat 6 psnext standard value measured value measured value cat 6 attenuation standard value 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value . channel links channel link psacr frequency (mhz) measured value cat 6 rl standard value 60 50 40 30 20 10 0 rl(db) 1 10 100 1000 measured value cat 6 rl standard value . patch cable patch cable 2 m rl frequency (mhz) measured value cat 6 next standard value 120 100 80 60 40 20 0 next(db) 1 10 100 1000 measured value cat 6 next standard value patch cable 2 m next frequency (mhz) dsp4300 main unit channel link adapter patch cable 2 m dsp4300 remote unit technical documentation cat 6 transmission characteristics data this is representative transfer performance for the tm23 series. a high margin is used for cat 6 standard values. the contents of this catalog are current as of date of publication. contents are subject to change without notice for the purpo se of improvements. 5-23,osaki 5-chome,shinagawa-ku,tokyo 141-8587,japan phone: 81-3-3491-9741, fax: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 cat 6 data wiring system connectors tm23 series 2008.4 w features 1. high-speed data transfer conforms to the tia/eia-568b.2-1 data wiring standard, thereby clears cat 6 transfer performance requirements. as such, these products easily support gigabit ethernet (1000base-t/1000base-tx), which is the next generation of high-speed applications. 2. a product lineup focused on building of a complete system in addition to modular plugs, hirose electric offers box type outlets, patch panels, and wall outlets. systems built using all components from the same manufacturer will assure stable data transfer. 3. support of a wide variety of manufacturers' cat 6 cable to assure high performance of the system we test and monitor data transfer using cat 6 cables manufactured by different suppliers. 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value measured value measured value cat 6 attenuation standard value cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value permanent link psacr frequency (mhz) tm23 series cat 6 data wiring system connectors 2 100 m ohms min. no flashover or insulation breakdown. 230 m ohms max. no electrical discontinuity of 5s min. contact resistance : 250m ohms max. no electrical discontinuity of 5s. min. contact resistance : 250m ohms max. contact resistance : 250m ohms max. contact resistance : 250 m ohms max. insulation resistance : 100 m ohms min. contact resistance: 250 m ohms max. insulation resistance: 1 m ohms min. (high humidity) insulation resistance: 100 m ohms min. (dry state) contact resistance: 250 m ohms max. 100 v dc 500 v ac / one minute 100ma frequency: 10 to 55 hz, single amplitude of 0.75 mm, 1 octave/min. conduct, 10 cycles to each 3 directions. acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 6 axes. 200 cycles temperature : -553? ? +15? to +35? ? +852? ? +15? to +35? duration (minutes) : 30 ? 2 to 3 ? 30 ? 2 to 3 5 cycles 500 hours at temperature of 40 ? and humidity of 90% to 95%. 5% salt water/48 hours. 1. insulation resistance 2. withstanding voltage (between adjacent contacts) 3. contact resistance 4. vibration 5. shock 6. durability (mating/un-mating) 7. temperature cycle 8. humidity 9. salt spray rating current rating 1a voltage rating 125v ac operating temperature range -25 ? to +60 ? (note) plugs, boots specifications materials and finishes item specification conditions insulator contacts strain relief clamp polycarbonate phosphor bronze brass color: clear contact area: gold plated nickel plated ul94v-0 ------------------- ------------------- component plugs material finish remarks insulator eptr white (standard color) black, red, blue, yellow, green, orange, gray, light blue ul94v-0 ------------------- component boots material finish remarks note: includes temperature rise caused by current flow. ordering information plugs series name : tm23 connector type p : plug size 8 : 8 contacts inserted contacts 8p : 8 contacts 1 2 3 8p 8 - p - tm23 4 1 2 3 4 boots series name : tm23 connector type p : plug size 8 : 8 contacts bt : boot 1 2 3 bt 8 - p - tm23 4 1 2 3 4 +5 0 +5 0 jacks series name : tm23 connector type r : jack mounting style/termination type 5a : right-angle/through hole jack opening code 8 : for 8 contacts number of inserted contacts 8 : 8 contacts 1 2 3 4 5 8 8 5a - r tm23 1 2 3 4 5 3 tm23 series cat 6 data wiring system connectors plugs part no. tm23p-88p 222-2916-6 yes cl no. rohs tm23p-88p c6 1 (25) 24 5.4 10.05 10.05 6 17 (17.5) contact no. 1 connecter guide insert (shown inserted) contact no. 8 11.7 5.05 (12.9) 8.9 6.6 6.09 4.75 plug body connector guide insert * strain relief clamp * (15.45) b overview . contact configured for cat 6 performance. . 0.5 mm dia. solid wire or awg #24 stranded wire. . use with cables having external diameters of 5.4 mm to 6.8mm. . strain relief clamp protects the contact/conductor termination areas. b mated with corresponding receptacle (shown for reference only) * supplied separately(1bag contains 1pcs.) tm23 series cat 6 data wiring system connectors 4 boots part number cl no. color rohs TM23P-8-BT (01) TM23P-8-BT(01) TM23P-8-BT(02) TM23P-8-BT(03) TM23P-8-BT(04) TM23P-8-BT(05) TM23P-8-BT(06) TM23P-8-BT(07) TM23P-8-BT(08) 222-2917-9 -02 222-2917-9-01 222-2917-9-02 222-2917-9-03 222-2917-9-04 222-2917-9-05 222-2917-9-06 222-2917-9-07 222-2917-9-08 white black red blue yellow green orange gray light blue yes TM23P-8-BT 1 12 13.4 (12) (4) 25.3 (17.2) (16.9) 10.8 10.8 8.8 (6.5) ?6.8 (40) tm23p-88p protected lock/release lever ?6.8max b overview . dedicated boots for the tm23p-88p. . 9 color variations. . halogen-free. . protects the plugs lock/release lever. b boot installed 5 tm23 series cat 6 data wiring system connectors manual termination tool note: to achieve cat 6 performance, refer to tm23p-88p cable termination procedure manual(etad-e2415). solid copper conductor: 0.5mm dia. stranded copper conductor: awg#24 (0.95mm to 1.05mm) (5.4mm to 6.8mm) conductor individual conductor insulation dia. overall jacket dia. filler conductor insulation jacket recommended cable specification hrs marking side (for contact/conductor termination) a reverse side (for cable strain relief clamp crimping) part no. ht601-tm23/22p-88p 902-2128-1 cl no. * changing the a assembly parts to tm22 dedicated clamp parts will allow wiring of hiroses tm22p-88p plugs supporting cat 5e. body applicator item automatic contact termination machine cm-105 ap105-tm23p-88p part number cl901-0005-4 cl901-2588-5 cl no. cable strain relief clamp crimping jig (manual operated) tm23p-88p/ck-mp(01) part number cl902-2130-3(01) cl no. 6 tm23 series cat 6 data wiring system connectors note: the jack by itself does not clear cat 6 performance requirements. compensation on the board is required to secure cat 6 performance. jacks part number cl no. color rohs tm23r-5a-88(50) 222-2918-1-50 black yes b overview . unique contact structure designed for crosstalk reduction. . (through hole : 3 rows) . temporary retention to board with integral flexible posts. b pcb mounting pattern 1 2 3 4 5 6 7 8 15 6 connector front edge 1.016 3.048 5.08 7.112 1.3 2.54 4 recommended board thickness: 1.6mm 8-?0.8 2-?2.4 15 15 14.5 6 13 contact no. 8 contact no. 1 flexible post 0.43 4 2.54 1.3 3 2.1 0.35 7 tm23 series cat 6 data wiring system connectors precautions in system construction the tm23 series connector and components were designed for cat 6 data transfer. however, it is highly recommended that the entire connected system be checked for this performance level. cable termination procedures manufacturer's name web site hitachi cable, ltd. http://www.hitachi-cable.co.jp/index_e.html tonichi kyosan cable, ltd. http://www.tonichi-kyosan.co.jp/ nipponseisen co. ltd. http://www.nscable.co.jp/ okano electric wire co., ltd. http://www.okano-cable.co.jp/english/index.html tsushin kogyo k.k. http://www.tsuko.co.jp/ showa electric wire & cable co., ltd. http://www.swcc.co.jp/eng/index.html fuji electric cable co, ltd. http://www.tokyo-fuji.co.jp/index_f.htm recommended cable manufacturers hirose electric closely examines the transfer performance of these connectors with the cat 6 cable that is manufactured and sold by the various cable manufacturers. please use the cable from among those indicated in table 1 for system construction with the tm23 series. use of different manufacturers' components use of different manufacturers' components in one system could cause the deterioration of transfer performance. check of the system performance verification all measures have been taken to assure the transfer performance of the tm23 series. however, it is highly recommended to verify transfer performance of complete system using commercially available measuring instruments. hirose electric does not build wiring systems. please contact hirose electric sales representative for system construction contractor information. note: please see the web sites of the various manufacturers for cable specifications. contact hrs for recommendations when using cables from other suppliers. table1 recommended cable manufacturers cable termination procedure manual no. etad-e2415 tm23p-88p part number 8 tm23 series cat 6 data wiring system connectors dsp4300 main unit dsp4300 remote unit permanent link adapter (pm06) horizontal cable 90 m tm23r-mpp24 tm23r-t01 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value measured value measured value cat 6 attenuation standard value cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value . permanent links permanent link psacr frequency (mhz) dsp4300 main unit channel link adapter dsp4300 remote unit horizontal cable 90 m tm23r-mpp24 stranded wire 3 m patch cable 2 m tm23r-t01 ( :tm23p-88p) patch cable 5 m cat 6 psnext standard value measured value measured value cat 6 attenuation standard value 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value . channel links channel link psacr frequency (mhz) measured value cat 6 rl standard value 60 50 40 30 20 10 0 rl(db) 1 10 100 1000 measured value cat 6 rl standard value . patch cable patch cable 2 m rl frequency (mhz) measured value cat 6 next standard value 120 100 80 60 40 20 0 next(db) 1 10 100 1000 measured value cat 6 next standard value patch cable 2 m next frequency (mhz) dsp4300 main unit channel link adapter patch cable 2 m dsp4300 remote unit technical documentation cat 6 transmission characteristics data this is representative transfer performance for the tm23 series. a high margin is used for cat 6 standard values. the contents of this catalog are current as of date of publication. contents are subject to change without notice for the purpo se of improvements. 5-23,osaki 5-chome,shinagawa-ku,tokyo 141-8587,japan phone: 81-3-3491-9741, fax: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 cat 6 data wiring system connectors tm23 series 2008.4 w features 1. high-speed data transfer conforms to the tia/eia-568b.2-1 data wiring standard, thereby clears cat 6 transfer performance requirements. as such, these products easily support gigabit ethernet (1000base-t/1000base-tx), which is the next generation of high-speed applications. 2. a product lineup focused on building of a complete system in addition to modular plugs, hirose electric offers box type outlets, patch panels, and wall outlets. systems built using all components from the same manufacturer will assure stable data transfer. 3. support of a wide variety of manufacturers' cat 6 cable to assure high performance of the system we test and monitor data transfer using cat 6 cables manufactured by different suppliers. 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value measured value measured value cat 6 attenuation standard value cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value permanent link psacr frequency (mhz) tm23 series cat 6 data wiring system connectors 2 100 m ohms min. no flashover or insulation breakdown. 230 m ohms max. no electrical discontinuity of 5s min. contact resistance : 250m ohms max. no electrical discontinuity of 5s. min. contact resistance : 250m ohms max. contact resistance : 250m ohms max. contact resistance : 250 m ohms max. insulation resistance : 100 m ohms min. contact resistance: 250 m ohms max. insulation resistance: 1 m ohms min. (high humidity) insulation resistance: 100 m ohms min. (dry state) contact resistance: 250 m ohms max. 100 v dc 500 v ac / one minute 100ma frequency: 10 to 55 hz, single amplitude of 0.75 mm, 1 octave/min. conduct, 10 cycles to each 3 directions. acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 6 axes. 200 cycles temperature : -553? ? +15? to +35? ? +852? ? +15? to +35? duration (minutes) : 30 ? 2 to 3 ? 30 ? 2 to 3 5 cycles 500 hours at temperature of 40 ? and humidity of 90% to 95%. 5% salt water/48 hours. 1. insulation resistance 2. withstanding voltage (between adjacent contacts) 3. contact resistance 4. vibration 5. shock 6. durability (mating/un-mating) 7. temperature cycle 8. humidity 9. salt spray rating current rating 1a voltage rating 125v ac operating temperature range -25 ? to +60 ? (note) plugs, boots specifications materials and finishes item specification conditions insulator contacts strain relief clamp polycarbonate phosphor bronze brass color: clear contact area: gold plated nickel plated ul94v-0 ------------------- ------------------- component plugs material finish remarks insulator eptr white (standard color) black, red, blue, yellow, green, orange, gray, light blue ul94v-0 ------------------- component boots material finish remarks note: includes temperature rise caused by current flow. ordering information plugs series name : tm23 connector type p : plug size 8 : 8 contacts inserted contacts 8p : 8 contacts 1 2 3 8p 8 - p - tm23 4 1 2 3 4 boots series name : tm23 connector type p : plug size 8 : 8 contacts bt : boot 1 2 3 bt 8 - p - tm23 4 1 2 3 4 +5 0 +5 0 jacks series name : tm23 connector type r : jack mounting style/termination type 5a : right-angle/through hole jack opening code 8 : for 8 contacts number of inserted contacts 8 : 8 contacts 1 2 3 4 5 8 8 5a - r tm23 1 2 3 4 5 3 tm23 series cat 6 data wiring system connectors plugs part no. tm23p-88p 222-2916-6 yes cl no. rohs tm23p-88p c6 1 (25) 24 5.4 10.05 10.05 6 17 (17.5) contact no. 1 connecter guide insert (shown inserted) contact no. 8 11.7 5.05 (12.9) 8.9 6.6 6.09 4.75 plug body connector guide insert * strain relief clamp * (15.45) b overview . contact configured for cat 6 performance. . 0.5 mm dia. solid wire or awg #24 stranded wire. . use with cables having external diameters of 5.4 mm to 6.8mm. . strain relief clamp protects the contact/conductor termination areas. b mated with corresponding receptacle (shown for reference only) * supplied separately(1bag contains 1pcs.) tm23 series cat 6 data wiring system connectors 4 boots part number cl no. color rohs TM23P-8-BT (01) TM23P-8-BT(01) TM23P-8-BT(02) TM23P-8-BT(03) TM23P-8-BT(04) TM23P-8-BT(05) TM23P-8-BT(06) TM23P-8-BT(07) TM23P-8-BT(08) 222-2917-9 -02 222-2917-9-01 222-2917-9-02 222-2917-9-03 222-2917-9-04 222-2917-9-05 222-2917-9-06 222-2917-9-07 222-2917-9-08 white black red blue yellow green orange gray light blue yes TM23P-8-BT 1 12 13.4 (12) (4) 25.3 (17.2) (16.9) 10.8 10.8 8.8 (6.5) ?6.8 (40) tm23p-88p protected lock/release lever ?6.8max b overview . dedicated boots for the tm23p-88p. . 9 color variations. . halogen-free. . protects the plugs lock/release lever. b boot installed 5 tm23 series cat 6 data wiring system connectors manual termination tool note: to achieve cat 6 performance, refer to tm23p-88p cable termination procedure manual(etad-e2415). solid copper conductor: 0.5mm dia. stranded copper conductor: awg#24 (0.95mm to 1.05mm) (5.4mm to 6.8mm) conductor individual conductor insulation dia. overall jacket dia. filler conductor insulation jacket recommended cable specification hrs marking side (for contact/conductor termination) a reverse side (for cable strain relief clamp crimping) part no. ht601-tm23/22p-88p 902-2128-1 cl no. * changing the a assembly parts to tm22 dedicated clamp parts will allow wiring of hiroses tm22p-88p plugs supporting cat 5e. body applicator item automatic contact termination machine cm-105 ap105-tm23p-88p part number cl901-0005-4 cl901-2588-5 cl no. cable strain relief clamp crimping jig (manual operated) tm23p-88p/ck-mp(01) part number cl902-2130-3(01) cl no. 6 tm23 series cat 6 data wiring system connectors note: the jack by itself does not clear cat 6 performance requirements. compensation on the board is required to secure cat 6 performance. jacks part number cl no. color rohs tm23r-5a-88(50) 222-2918-1-50 black yes b overview . unique contact structure designed for crosstalk reduction. . (through hole : 3 rows) . temporary retention to board with integral flexible posts. b pcb mounting pattern 1 2 3 4 5 6 7 8 15 6 connector front edge 1.016 3.048 5.08 7.112 1.3 2.54 4 recommended board thickness: 1.6mm 8-?0.8 2-?2.4 15 15 14.5 6 13 contact no. 8 contact no. 1 flexible post 0.43 4 2.54 1.3 3 2.1 0.35 7 tm23 series cat 6 data wiring system connectors precautions in system construction the tm23 series connector and components were designed for cat 6 data transfer. however, it is highly recommended that the entire connected system be checked for this performance level. cable termination procedures manufacturer's name web site hitachi cable, ltd. http://www.hitachi-cable.co.jp/index_e.html tonichi kyosan cable, ltd. http://www.tonichi-kyosan.co.jp/ nipponseisen co. ltd. http://www.nscable.co.jp/ okano electric wire co., ltd. http://www.okano-cable.co.jp/english/index.html tsushin kogyo k.k. http://www.tsuko.co.jp/ showa electric wire & cable co., ltd. http://www.swcc.co.jp/eng/index.html fuji electric cable co, ltd. http://www.tokyo-fuji.co.jp/index_f.htm recommended cable manufacturers hirose electric closely examines the transfer performance of these connectors with the cat 6 cable that is manufactured and sold by the various cable manufacturers. please use the cable from among those indicated in table 1 for system construction with the tm23 series. use of different manufacturers' components use of different manufacturers' components in one system could cause the deterioration of transfer performance. check of the system performance verification all measures have been taken to assure the transfer performance of the tm23 series. however, it is highly recommended to verify transfer performance of complete system using commercially available measuring instruments. hirose electric does not build wiring systems. please contact hirose electric sales representative for system construction contractor information. note: please see the web sites of the various manufacturers for cable specifications. contact hrs for recommendations when using cables from other suppliers. table1 recommended cable manufacturers cable termination procedure manual no. etad-e2415 tm23p-88p part number 8 tm23 series cat 6 data wiring system connectors dsp4300 main unit dsp4300 remote unit permanent link adapter (pm06) horizontal cable 90 m tm23r-mpp24 tm23r-t01 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value measured value measured value cat 6 attenuation standard value cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value . permanent links permanent link psacr frequency (mhz) dsp4300 main unit channel link adapter dsp4300 remote unit horizontal cable 90 m tm23r-mpp24 stranded wire 3 m patch cable 2 m tm23r-t01 ( :tm23p-88p) patch cable 5 m cat 6 psnext standard value measured value measured value cat 6 attenuation standard value 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value . channel links channel link psacr frequency (mhz) measured value cat 6 rl standard value 60 50 40 30 20 10 0 rl(db) 1 10 100 1000 measured value cat 6 rl standard value . patch cable patch cable 2 m rl frequency (mhz) measured value cat 6 next standard value 120 100 80 60 40 20 0 next(db) 1 10 100 1000 measured value cat 6 next standard value patch cable 2 m next frequency (mhz) dsp4300 main unit channel link adapter patch cable 2 m dsp4300 remote unit technical documentation cat 6 transmission characteristics data this is representative transfer performance for the tm23 series. a high margin is used for cat 6 standard values. the contents of this catalog are current as of date of publication. contents are subject to change without notice for the purpo se of improvements. 5-23,osaki 5-chome,shinagawa-ku,tokyo 141-8587,japan phone: 81-3-3491-9741, fax: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 cat 6 data wiring system connectors tm23 series 2008.4 w features 1. high-speed data transfer conforms to the tia/eia-568b.2-1 data wiring standard, thereby clears cat 6 transfer performance requirements. as such, these products easily support gigabit ethernet (1000base-t/1000base-tx), which is the next generation of high-speed applications. 2. a product lineup focused on building of a complete system in addition to modular plugs, hirose electric offers box type outlets, patch panels, and wall outlets. systems built using all components from the same manufacturer will assure stable data transfer. 3. support of a wide variety of manufacturers' cat 6 cable to assure high performance of the system we test and monitor data transfer using cat 6 cables manufactured by different suppliers. 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value measured value measured value cat 6 attenuation standard value cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value permanent link psacr frequency (mhz) tm23 series cat 6 data wiring system connectors 2 100 m ohms min. no flashover or insulation breakdown. 230 m ohms max. no electrical discontinuity of 5s min. contact resistance : 250m ohms max. no electrical discontinuity of 5s. min. contact resistance : 250m ohms max. contact resistance : 250m ohms max. contact resistance : 250 m ohms max. insulation resistance : 100 m ohms min. contact resistance: 250 m ohms max. insulation resistance: 1 m ohms min. (high humidity) insulation resistance: 100 m ohms min. (dry state) contact resistance: 250 m ohms max. 100 v dc 500 v ac / one minute 100ma frequency: 10 to 55 hz, single amplitude of 0.75 mm, 1 octave/min. conduct, 10 cycles to each 3 directions. acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 6 axes. 200 cycles temperature : -553? ? +15? to +35? ? +852? ? +15? to +35? duration (minutes) : 30 ? 2 to 3 ? 30 ? 2 to 3 5 cycles 500 hours at temperature of 40 ? and humidity of 90% to 95%. 5% salt water/48 hours. 1. insulation resistance 2. withstanding voltage (between adjacent contacts) 3. contact resistance 4. vibration 5. shock 6. durability (mating/un-mating) 7. temperature cycle 8. humidity 9. salt spray rating current rating 1a voltage rating 125v ac operating temperature range -25 ? to +60 ? (note) plugs, boots specifications materials and finishes item specification conditions insulator contacts strain relief clamp polycarbonate phosphor bronze brass color: clear contact area: gold plated nickel plated ul94v-0 ------------------- ------------------- component plugs material finish remarks insulator eptr white (standard color) black, red, blue, yellow, green, orange, gray, light blue ul94v-0 ------------------- component boots material finish remarks note: includes temperature rise caused by current flow. ordering information plugs series name : tm23 connector type p : plug size 8 : 8 contacts inserted contacts 8p : 8 contacts 1 2 3 8p 8 - p - tm23 4 1 2 3 4 boots series name : tm23 connector type p : plug size 8 : 8 contacts bt : boot 1 2 3 bt 8 - p - tm23 4 1 2 3 4 +5 0 +5 0 jacks series name : tm23 connector type r : jack mounting style/termination type 5a : right-angle/through hole jack opening code 8 : for 8 contacts number of inserted contacts 8 : 8 contacts 1 2 3 4 5 8 8 5a - r tm23 1 2 3 4 5 3 tm23 series cat 6 data wiring system connectors plugs part no. tm23p-88p 222-2916-6 yes cl no. rohs tm23p-88p c6 1 (25) 24 5.4 10.05 10.05 6 17 (17.5) contact no. 1 connecter guide insert (shown inserted) contact no. 8 11.7 5.05 (12.9) 8.9 6.6 6.09 4.75 plug body connector guide insert * strain relief clamp * (15.45) b overview . contact configured for cat 6 performance. . 0.5 mm dia. solid wire or awg #24 stranded wire. . use with cables having external diameters of 5.4 mm to 6.8mm. . strain relief clamp protects the contact/conductor termination areas. b mated with corresponding receptacle (shown for reference only) * supplied separately(1bag contains 1pcs.) tm23 series cat 6 data wiring system connectors 4 boots part number cl no. color rohs TM23P-8-BT (01) TM23P-8-BT(01) TM23P-8-BT(02) TM23P-8-BT(03) TM23P-8-BT(04) TM23P-8-BT(05) TM23P-8-BT(06) TM23P-8-BT(07) TM23P-8-BT(08) 222-2917-9 -02 222-2917-9-01 222-2917-9-02 222-2917-9-03 222-2917-9-04 222-2917-9-05 222-2917-9-06 222-2917-9-07 222-2917-9-08 white black red blue yellow green orange gray light blue yes TM23P-8-BT 1 12 13.4 (12) (4) 25.3 (17.2) (16.9) 10.8 10.8 8.8 (6.5) ?6.8 (40) tm23p-88p protected lock/release lever ?6.8max b overview . dedicated boots for the tm23p-88p. . 9 color variations. . halogen-free. . protects the plugs lock/release lever. b boot installed 5 tm23 series cat 6 data wiring system connectors manual termination tool note: to achieve cat 6 performance, refer to tm23p-88p cable termination procedure manual(etad-e2415). solid copper conductor: 0.5mm dia. stranded copper conductor: awg#24 (0.95mm to 1.05mm) (5.4mm to 6.8mm) conductor individual conductor insulation dia. overall jacket dia. filler conductor insulation jacket recommended cable specification hrs marking side (for contact/conductor termination) a reverse side (for cable strain relief clamp crimping) part no. ht601-tm23/22p-88p 902-2128-1 cl no. * changing the a assembly parts to tm22 dedicated clamp parts will allow wiring of hiroses tm22p-88p plugs supporting cat 5e. body applicator item automatic contact termination machine cm-105 ap105-tm23p-88p part number cl901-0005-4 cl901-2588-5 cl no. cable strain relief clamp crimping jig (manual operated) tm23p-88p/ck-mp(01) part number cl902-2130-3(01) cl no. 6 tm23 series cat 6 data wiring system connectors note: the jack by itself does not clear cat 6 performance requirements. compensation on the board is required to secure cat 6 performance. jacks part number cl no. color rohs tm23r-5a-88(50) 222-2918-1-50 black yes b overview . unique contact structure designed for crosstalk reduction. . (through hole : 3 rows) . temporary retention to board with integral flexible posts. b pcb mounting pattern 1 2 3 4 5 6 7 8 15 6 connector front edge 1.016 3.048 5.08 7.112 1.3 2.54 4 recommended board thickness: 1.6mm 8-?0.8 2-?2.4 15 15 14.5 6 13 contact no. 8 contact no. 1 flexible post 0.43 4 2.54 1.3 3 2.1 0.35 7 tm23 series cat 6 data wiring system connectors precautions in system construction the tm23 series connector and components were designed for cat 6 data transfer. however, it is highly recommended that the entire connected system be checked for this performance level. cable termination procedures manufacturer's name web site hitachi cable, ltd. http://www.hitachi-cable.co.jp/index_e.html tonichi kyosan cable, ltd. http://www.tonichi-kyosan.co.jp/ nipponseisen co. ltd. http://www.nscable.co.jp/ okano electric wire co., ltd. http://www.okano-cable.co.jp/english/index.html tsushin kogyo k.k. http://www.tsuko.co.jp/ showa electric wire & cable co., ltd. http://www.swcc.co.jp/eng/index.html fuji electric cable co, ltd. http://www.tokyo-fuji.co.jp/index_f.htm recommended cable manufacturers hirose electric closely examines the transfer performance of these connectors with the cat 6 cable that is manufactured and sold by the various cable manufacturers. please use the cable from among those indicated in table 1 for system construction with the tm23 series. use of different manufacturers' components use of different manufacturers' components in one system could cause the deterioration of transfer performance. check of the system performance verification all measures have been taken to assure the transfer performance of the tm23 series. however, it is highly recommended to verify transfer performance of complete system using commercially available measuring instruments. hirose electric does not build wiring systems. please contact hirose electric sales representative for system construction contractor information. note: please see the web sites of the various manufacturers for cable specifications. contact hrs for recommendations when using cables from other suppliers. table1 recommended cable manufacturers cable termination procedure manual no. etad-e2415 tm23p-88p part number 8 tm23 series cat 6 data wiring system connectors dsp4300 main unit dsp4300 remote unit permanent link adapter (pm06) horizontal cable 90 m tm23r-mpp24 tm23r-t01 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value measured value measured value cat 6 attenuation standard value cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value . permanent links permanent link psacr frequency (mhz) dsp4300 main unit channel link adapter dsp4300 remote unit horizontal cable 90 m tm23r-mpp24 stranded wire 3 m patch cable 2 m tm23r-t01 ( :tm23p-88p) patch cable 5 m cat 6 psnext standard value measured value measured value cat 6 attenuation standard value 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value . channel links channel link psacr frequency (mhz) measured value cat 6 rl standard value 60 50 40 30 20 10 0 rl(db) 1 10 100 1000 measured value cat 6 rl standard value . patch cable patch cable 2 m rl frequency (mhz) measured value cat 6 next standard value 120 100 80 60 40 20 0 next(db) 1 10 100 1000 measured value cat 6 next standard value patch cable 2 m next frequency (mhz) dsp4300 main unit channel link adapter patch cable 2 m dsp4300 remote unit technical documentation cat 6 transmission characteristics data this is representative transfer performance for the tm23 series. a high margin is used for cat 6 standard values. the contents of this catalog are current as of date of publication. contents are subject to change without notice for the purpo se of improvements. 5-23,osaki 5-chome,shinagawa-ku,tokyo 141-8587,japan phone: 81-3-3491-9741, fax: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 cat 6 data wiring system connectors tm23 series 2008.4 w features 1. high-speed data transfer conforms to the tia/eia-568b.2-1 data wiring standard, thereby clears cat 6 transfer performance requirements. as such, these products easily support gigabit ethernet (1000base-t/1000base-tx), which is the next generation of high-speed applications. 2. a product lineup focused on building of a complete system in addition to modular plugs, hirose electric offers box type outlets, patch panels, and wall outlets. systems built using all components from the same manufacturer will assure stable data transfer. 3. support of a wide variety of manufacturers' cat 6 cable to assure high performance of the system we test and monitor data transfer using cat 6 cables manufactured by different suppliers. 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value measured value measured value cat 6 attenuation standard value cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value permanent link psacr frequency (mhz) tm23 series cat 6 data wiring system connectors 2 100 m ohms min. no flashover or insulation breakdown. 230 m ohms max. no electrical discontinuity of 5s min. contact resistance : 250m ohms max. no electrical discontinuity of 5s. min. contact resistance : 250m ohms max. contact resistance : 250m ohms max. contact resistance : 250 m ohms max. insulation resistance : 100 m ohms min. contact resistance: 250 m ohms max. insulation resistance: 1 m ohms min. (high humidity) insulation resistance: 100 m ohms min. (dry state) contact resistance: 250 m ohms max. 100 v dc 500 v ac / one minute 100ma frequency: 10 to 55 hz, single amplitude of 0.75 mm, 1 octave/min. conduct, 10 cycles to each 3 directions. acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 6 axes. 200 cycles temperature : -553? ? +15? to +35? ? +852? ? +15? to +35? duration (minutes) : 30 ? 2 to 3 ? 30 ? 2 to 3 5 cycles 500 hours at temperature of 40 ? and humidity of 90% to 95%. 5% salt water/48 hours. 1. insulation resistance 2. withstanding voltage (between adjacent contacts) 3. contact resistance 4. vibration 5. shock 6. durability (mating/un-mating) 7. temperature cycle 8. humidity 9. salt spray rating current rating 1a voltage rating 125v ac operating temperature range -25 ? to +60 ? (note) plugs, boots specifications materials and finishes item specification conditions insulator contacts strain relief clamp polycarbonate phosphor bronze brass color: clear contact area: gold plated nickel plated ul94v-0 ------------------- ------------------- component plugs material finish remarks insulator eptr white (standard color) black, red, blue, yellow, green, orange, gray, light blue ul94v-0 ------------------- component boots material finish remarks note: includes temperature rise caused by current flow. ordering information plugs series name : tm23 connector type p : plug size 8 : 8 contacts inserted contacts 8p : 8 contacts 1 2 3 8p 8 - p - tm23 4 1 2 3 4 boots series name : tm23 connector type p : plug size 8 : 8 contacts bt : boot 1 2 3 bt 8 - p - tm23 4 1 2 3 4 +5 0 +5 0 jacks series name : tm23 connector type r : jack mounting style/termination type 5a : right-angle/through hole jack opening code 8 : for 8 contacts number of inserted contacts 8 : 8 contacts 1 2 3 4 5 8 8 5a - r tm23 1 2 3 4 5 3 tm23 series cat 6 data wiring system connectors plugs part no. tm23p-88p 222-2916-6 yes cl no. rohs tm23p-88p c6 1 (25) 24 5.4 10.05 10.05 6 17 (17.5) contact no. 1 connecter guide insert (shown inserted) contact no. 8 11.7 5.05 (12.9) 8.9 6.6 6.09 4.75 plug body connector guide insert * strain relief clamp * (15.45) b overview . contact configured for cat 6 performance. . 0.5 mm dia. solid wire or awg #24 stranded wire. . use with cables having external diameters of 5.4 mm to 6.8mm. . strain relief clamp protects the contact/conductor termination areas. b mated with corresponding receptacle (shown for reference only) * supplied separately(1bag contains 1pcs.) tm23 series cat 6 data wiring system connectors 4 boots part number cl no. color rohs TM23P-8-BT (01) TM23P-8-BT(01) TM23P-8-BT(02) TM23P-8-BT(03) TM23P-8-BT(04) TM23P-8-BT(05) TM23P-8-BT(06) TM23P-8-BT(07) TM23P-8-BT(08) 222-2917-9 -02 222-2917-9-01 222-2917-9-02 222-2917-9-03 222-2917-9-04 222-2917-9-05 222-2917-9-06 222-2917-9-07 222-2917-9-08 white black red blue yellow green orange gray light blue yes TM23P-8-BT 1 12 13.4 (12) (4) 25.3 (17.2) (16.9) 10.8 10.8 8.8 (6.5) ?6.8 (40) tm23p-88p protected lock/release lever ?6.8max b overview . dedicated boots for the tm23p-88p. . 9 color variations. . halogen-free. . protects the plugs lock/release lever. b boot installed 5 tm23 series cat 6 data wiring system connectors manual termination tool note: to achieve cat 6 performance, refer to tm23p-88p cable termination procedure manual(etad-e2415). solid copper conductor: 0.5mm dia. stranded copper conductor: awg#24 (0.95mm to 1.05mm) (5.4mm to 6.8mm) conductor individual conductor insulation dia. overall jacket dia. filler conductor insulation jacket recommended cable specification hrs marking side (for contact/conductor termination) a reverse side (for cable strain relief clamp crimping) part no. ht601-tm23/22p-88p 902-2128-1 cl no. * changing the a assembly parts to tm22 dedicated clamp parts will allow wiring of hiroses tm22p-88p plugs supporting cat 5e. body applicator item automatic contact termination machine cm-105 ap105-tm23p-88p part number cl901-0005-4 cl901-2588-5 cl no. cable strain relief clamp crimping jig (manual operated) tm23p-88p/ck-mp(01) part number cl902-2130-3(01) cl no. 6 tm23 series cat 6 data wiring system connectors note: the jack by itself does not clear cat 6 performance requirements. compensation on the board is required to secure cat 6 performance. jacks part number cl no. color rohs tm23r-5a-88(50) 222-2918-1-50 black yes b overview . unique contact structure designed for crosstalk reduction. . (through hole : 3 rows) . temporary retention to board with integral flexible posts. b pcb mounting pattern 1 2 3 4 5 6 7 8 15 6 connector front edge 1.016 3.048 5.08 7.112 1.3 2.54 4 recommended board thickness: 1.6mm 8-?0.8 2-?2.4 15 15 14.5 6 13 contact no. 8 contact no. 1 flexible post 0.43 4 2.54 1.3 3 2.1 0.35 7 tm23 series cat 6 data wiring system connectors precautions in system construction the tm23 series connector and components were designed for cat 6 data transfer. however, it is highly recommended that the entire connected system be checked for this performance level. cable termination procedures manufacturer's name web site hitachi cable, ltd. http://www.hitachi-cable.co.jp/index_e.html tonichi kyosan cable, ltd. http://www.tonichi-kyosan.co.jp/ nipponseisen co. ltd. http://www.nscable.co.jp/ okano electric wire co., ltd. http://www.okano-cable.co.jp/english/index.html tsushin kogyo k.k. http://www.tsuko.co.jp/ showa electric wire & cable co., ltd. http://www.swcc.co.jp/eng/index.html fuji electric cable co, ltd. http://www.tokyo-fuji.co.jp/index_f.htm recommended cable manufacturers hirose electric closely examines the transfer performance of these connectors with the cat 6 cable that is manufactured and sold by the various cable manufacturers. please use the cable from among those indicated in table 1 for system construction with the tm23 series. use of different manufacturers' components use of different manufacturers' components in one system could cause the deterioration of transfer performance. check of the system performance verification all measures have been taken to assure the transfer performance of the tm23 series. however, it is highly recommended to verify transfer performance of complete system using commercially available measuring instruments. hirose electric does not build wiring systems. please contact hirose electric sales representative for system construction contractor information. note: please see the web sites of the various manufacturers for cable specifications. contact hrs for recommendations when using cables from other suppliers. table1 recommended cable manufacturers cable termination procedure manual no. etad-e2415 tm23p-88p part number 8 tm23 series cat 6 data wiring system connectors dsp4300 main unit dsp4300 remote unit permanent link adapter (pm06) horizontal cable 90 m tm23r-mpp24 tm23r-t01 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value measured value measured value cat 6 attenuation standard value cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value . permanent links permanent link psacr frequency (mhz) dsp4300 main unit channel link adapter dsp4300 remote unit horizontal cable 90 m tm23r-mpp24 stranded wire 3 m patch cable 2 m tm23r-t01 ( :tm23p-88p) patch cable 5 m cat 6 psnext standard value measured value measured value cat 6 attenuation standard value 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value . channel links channel link psacr frequency (mhz) measured value cat 6 rl standard value 60 50 40 30 20 10 0 rl(db) 1 10 100 1000 measured value cat 6 rl standard value . patch cable patch cable 2 m rl frequency (mhz) measured value cat 6 next standard value 120 100 80 60 40 20 0 next(db) 1 10 100 1000 measured value cat 6 next standard value patch cable 2 m next frequency (mhz) dsp4300 main unit channel link adapter patch cable 2 m dsp4300 remote unit technical documentation cat 6 transmission characteristics data this is representative transfer performance for the tm23 series. a high margin is used for cat 6 standard values. the contents of this catalog are current as of date of publication. contents are subject to change without notice for the purpo se of improvements. 5-23,osaki 5-chome,shinagawa-ku,tokyo 141-8587,japan phone: 81-3-3491-9741, fax: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 cat 6 data wiring system connectors tm23 series 2008.4 w features 1. high-speed data transfer conforms to the tia/eia-568b.2-1 data wiring standard, thereby clears cat 6 transfer performance requirements. as such, these products easily support gigabit ethernet (1000base-t/1000base-tx), which is the next generation of high-speed applications. 2. a product lineup focused on building of a complete system in addition to modular plugs, hirose electric offers box type outlets, patch panels, and wall outlets. systems built using all components from the same manufacturer will assure stable data transfer. 3. support of a wide variety of manufacturers' cat 6 cable to assure high performance of the system we test and monitor data transfer using cat 6 cables manufactured by different suppliers. 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value measured value measured value cat 6 attenuation standard value cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value permanent link psacr frequency (mhz) tm23 series cat 6 data wiring system connectors 2 100 m ohms min. no flashover or insulation breakdown. 230 m ohms max. no electrical discontinuity of 5s min. contact resistance : 250m ohms max. no electrical discontinuity of 5s. min. contact resistance : 250m ohms max. contact resistance : 250m ohms max. contact resistance : 250 m ohms max. insulation resistance : 100 m ohms min. contact resistance: 250 m ohms max. insulation resistance: 1 m ohms min. (high humidity) insulation resistance: 100 m ohms min. (dry state) contact resistance: 250 m ohms max. 100 v dc 500 v ac / one minute 100ma frequency: 10 to 55 hz, single amplitude of 0.75 mm, 1 octave/min. conduct, 10 cycles to each 3 directions. acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 6 axes. 200 cycles temperature : -553? ? +15? to +35? ? +852? ? +15? to +35? duration (minutes) : 30 ? 2 to 3 ? 30 ? 2 to 3 5 cycles 500 hours at temperature of 40 ? and humidity of 90% to 95%. 5% salt water/48 hours. 1. insulation resistance 2. withstanding voltage (between adjacent contacts) 3. contact resistance 4. vibration 5. shock 6. durability (mating/un-mating) 7. temperature cycle 8. humidity 9. salt spray rating current rating 1a voltage rating 125v ac operating temperature range -25 ? to +60 ? (note) plugs, boots specifications materials and finishes item specification conditions insulator contacts strain relief clamp polycarbonate phosphor bronze brass color: clear contact area: gold plated nickel plated ul94v-0 ------------------- ------------------- component plugs material finish remarks insulator eptr white (standard color) black, red, blue, yellow, green, orange, gray, light blue ul94v-0 ------------------- component boots material finish remarks note: includes temperature rise caused by current flow. ordering information plugs series name : tm23 connector type p : plug size 8 : 8 contacts inserted contacts 8p : 8 contacts 1 2 3 8p 8 - p - tm23 4 1 2 3 4 boots series name : tm23 connector type p : plug size 8 : 8 contacts bt : boot 1 2 3 bt 8 - p - tm23 4 1 2 3 4 +5 0 +5 0 jacks series name : tm23 connector type r : jack mounting style/termination type 5a : right-angle/through hole jack opening code 8 : for 8 contacts number of inserted contacts 8 : 8 contacts 1 2 3 4 5 8 8 5a - r tm23 1 2 3 4 5 3 tm23 series cat 6 data wiring system connectors plugs part no. tm23p-88p 222-2916-6 yes cl no. rohs tm23p-88p c6 1 (25) 24 5.4 10.05 10.05 6 17 (17.5) contact no. 1 connecter guide insert (shown inserted) contact no. 8 11.7 5.05 (12.9) 8.9 6.6 6.09 4.75 plug body connector guide insert * strain relief clamp * (15.45) b overview . contact configured for cat 6 performance. . 0.5 mm dia. solid wire or awg #24 stranded wire. . use with cables having external diameters of 5.4 mm to 6.8mm. . strain relief clamp protects the contact/conductor termination areas. b mated with corresponding receptacle (shown for reference only) * supplied separately(1bag contains 1pcs.) tm23 series cat 6 data wiring system connectors 4 boots part number cl no. color rohs TM23P-8-BT (01) TM23P-8-BT(01) TM23P-8-BT(02) TM23P-8-BT(03) TM23P-8-BT(04) TM23P-8-BT(05) TM23P-8-BT(06) TM23P-8-BT(07) TM23P-8-BT(08) 222-2917-9 -02 222-2917-9-01 222-2917-9-02 222-2917-9-03 222-2917-9-04 222-2917-9-05 222-2917-9-06 222-2917-9-07 222-2917-9-08 white black red blue yellow green orange gray light blue yes TM23P-8-BT 1 12 13.4 (12) (4) 25.3 (17.2) (16.9) 10.8 10.8 8.8 (6.5) ?6.8 (40) tm23p-88p protected lock/release lever ?6.8max b overview . dedicated boots for the tm23p-88p. . 9 color variations. . halogen-free. . protects the plugs lock/release lever. b boot installed 5 tm23 series cat 6 data wiring system connectors manual termination tool note: to achieve cat 6 performance, refer to tm23p-88p cable termination procedure manual(etad-e2415). solid copper conductor: 0.5mm dia. stranded copper conductor: awg#24 (0.95mm to 1.05mm) (5.4mm to 6.8mm) conductor individual conductor insulation dia. overall jacket dia. filler conductor insulation jacket recommended cable specification hrs marking side (for contact/conductor termination) a reverse side (for cable strain relief clamp crimping) part no. ht601-tm23/22p-88p 902-2128-1 cl no. * changing the a assembly parts to tm22 dedicated clamp parts will allow wiring of hiroses tm22p-88p plugs supporting cat 5e. body applicator item automatic contact termination machine cm-105 ap105-tm23p-88p part number cl901-0005-4 cl901-2588-5 cl no. cable strain relief clamp crimping jig (manual operated) tm23p-88p/ck-mp(01) part number cl902-2130-3(01) cl no. 6 tm23 series cat 6 data wiring system connectors note: the jack by itself does not clear cat 6 performance requirements. compensation on the board is required to secure cat 6 performance. jacks part number cl no. color rohs tm23r-5a-88(50) 222-2918-1-50 black yes b overview . unique contact structure designed for crosstalk reduction. . (through hole : 3 rows) . temporary retention to board with integral flexible posts. b pcb mounting pattern 1 2 3 4 5 6 7 8 15 6 connector front edge 1.016 3.048 5.08 7.112 1.3 2.54 4 recommended board thickness: 1.6mm 8-?0.8 2-?2.4 15 15 14.5 6 13 contact no. 8 contact no. 1 flexible post 0.43 4 2.54 1.3 3 2.1 0.35 7 tm23 series cat 6 data wiring system connectors precautions in system construction the tm23 series connector and components were designed for cat 6 data transfer. however, it is highly recommended that the entire connected system be checked for this performance level. cable termination procedures manufacturer's name web site hitachi cable, ltd. http://www.hitachi-cable.co.jp/index_e.html tonichi kyosan cable, ltd. http://www.tonichi-kyosan.co.jp/ nipponseisen co. ltd. http://www.nscable.co.jp/ okano electric wire co., ltd. http://www.okano-cable.co.jp/english/index.html tsushin kogyo k.k. http://www.tsuko.co.jp/ showa electric wire & cable co., ltd. http://www.swcc.co.jp/eng/index.html fuji electric cable co, ltd. http://www.tokyo-fuji.co.jp/index_f.htm recommended cable manufacturers hirose electric closely examines the transfer performance of these connectors with the cat 6 cable that is manufactured and sold by the various cable manufacturers. please use the cable from among those indicated in table 1 for system construction with the tm23 series. use of different manufacturers' components use of different manufacturers' components in one system could cause the deterioration of transfer performance. check of the system performance verification all measures have been taken to assure the transfer performance of the tm23 series. however, it is highly recommended to verify transfer performance of complete system using commercially available measuring instruments. hirose electric does not build wiring systems. please contact hirose electric sales representative for system construction contractor information. note: please see the web sites of the various manufacturers for cable specifications. contact hrs for recommendations when using cables from other suppliers. table1 recommended cable manufacturers cable termination procedure manual no. etad-e2415 tm23p-88p part number 8 tm23 series cat 6 data wiring system connectors dsp4300 main unit dsp4300 remote unit permanent link adapter (pm06) horizontal cable 90 m tm23r-mpp24 tm23r-t01 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value measured value measured value cat 6 attenuation standard value cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value . permanent links permanent link psacr frequency (mhz) dsp4300 main unit channel link adapter dsp4300 remote unit horizontal cable 90 m tm23r-mpp24 stranded wire 3 m patch cable 2 m tm23r-t01 ( :tm23p-88p) patch cable 5 m cat 6 psnext standard value measured value measured value cat 6 attenuation standard value 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value . channel links channel link psacr frequency (mhz) measured value cat 6 rl standard value 60 50 40 30 20 10 0 rl(db) 1 10 100 1000 measured value cat 6 rl standard value . patch cable patch cable 2 m rl frequency (mhz) measured value cat 6 next standard value 120 100 80 60 40 20 0 next(db) 1 10 100 1000 measured value cat 6 next standard value patch cable 2 m next frequency (mhz) dsp4300 main unit channel link adapter patch cable 2 m dsp4300 remote unit technical documentation cat 6 transmission characteristics data this is representative transfer performance for the tm23 series. a high margin is used for cat 6 standard values. the contents of this catalog are current as of date of publication. contents are subject to change without notice for the purpo se of improvements. 5-23,osaki 5-chome,shinagawa-ku,tokyo 141-8587,japan phone: 81-3-3491-9741, fax: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 cat 6 data wiring system connectors tm23 series 2008.4 w features 1. high-speed data transfer conforms to the tia/eia-568b.2-1 data wiring standard, thereby clears cat 6 transfer performance requirements. as such, these products easily support gigabit ethernet (1000base-t/1000base-tx), which is the next generation of high-speed applications. 2. a product lineup focused on building of a complete system in addition to modular plugs, hirose electric offers box type outlets, patch panels, and wall outlets. systems built using all components from the same manufacturer will assure stable data transfer. 3. support of a wide variety of manufacturers' cat 6 cable to assure high performance of the system we test and monitor data transfer using cat 6 cables manufactured by different suppliers. 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value measured value measured value cat 6 attenuation standard value cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value permanent link psacr frequency (mhz) tm23 series cat 6 data wiring system connectors 2 100 m ohms min. no flashover or insulation breakdown. 230 m ohms max. no electrical discontinuity of 5s min. contact resistance : 250m ohms max. no electrical discontinuity of 5s. min. contact resistance : 250m ohms max. contact resistance : 250m ohms max. contact resistance : 250 m ohms max. insulation resistance : 100 m ohms min. contact resistance: 250 m ohms max. insulation resistance: 1 m ohms min. (high humidity) insulation resistance: 100 m ohms min. (dry state) contact resistance: 250 m ohms max. 100 v dc 500 v ac / one minute 100ma frequency: 10 to 55 hz, single amplitude of 0.75 mm, 1 octave/min. conduct, 10 cycles to each 3 directions. acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 6 axes. 200 cycles temperature : -553? ? +15? to +35? ? +852? ? +15? to +35? duration (minutes) : 30 ? 2 to 3 ? 30 ? 2 to 3 5 cycles 500 hours at temperature of 40 ? and humidity of 90% to 95%. 5% salt water/48 hours. 1. insulation resistance 2. withstanding voltage (between adjacent contacts) 3. contact resistance 4. vibration 5. shock 6. durability (mating/un-mating) 7. temperature cycle 8. humidity 9. salt spray rating current rating 1a voltage rating 125v ac operating temperature range -25 ? to +60 ? (note) plugs, boots specifications materials and finishes item specification conditions insulator contacts strain relief clamp polycarbonate phosphor bronze brass color: clear contact area: gold plated nickel plated ul94v-0 ------------------- ------------------- component plugs material finish remarks insulator eptr white (standard color) black, red, blue, yellow, green, orange, gray, light blue ul94v-0 ------------------- component boots material finish remarks note: includes temperature rise caused by current flow. ordering information plugs series name : tm23 connector type p : plug size 8 : 8 contacts inserted contacts 8p : 8 contacts 1 2 3 8p 8 - p - tm23 4 1 2 3 4 boots series name : tm23 connector type p : plug size 8 : 8 contacts bt : boot 1 2 3 bt 8 - p - tm23 4 1 2 3 4 +5 0 +5 0 jacks series name : tm23 connector type r : jack mounting style/termination type 5a : right-angle/through hole jack opening code 8 : for 8 contacts number of inserted contacts 8 : 8 contacts 1 2 3 4 5 8 8 5a - r tm23 1 2 3 4 5 3 tm23 series cat 6 data wiring system connectors plugs part no. tm23p-88p 222-2916-6 yes cl no. rohs tm23p-88p c6 1 (25) 24 5.4 10.05 10.05 6 17 (17.5) contact no. 1 connecter guide insert (shown inserted) contact no. 8 11.7 5.05 (12.9) 8.9 6.6 6.09 4.75 plug body connector guide insert * strain relief clamp * (15.45) b overview . contact configured for cat 6 performance. . 0.5 mm dia. solid wire or awg #24 stranded wire. . use with cables having external diameters of 5.4 mm to 6.8mm. . strain relief clamp protects the contact/conductor termination areas. b mated with corresponding receptacle (shown for reference only) * supplied separately(1bag contains 1pcs.) tm23 series cat 6 data wiring system connectors 4 boots part number cl no. color rohs TM23P-8-BT (01) TM23P-8-BT(01) TM23P-8-BT(02) TM23P-8-BT(03) TM23P-8-BT(04) TM23P-8-BT(05) TM23P-8-BT(06) TM23P-8-BT(07) TM23P-8-BT(08) 222-2917-9 -02 222-2917-9-01 222-2917-9-02 222-2917-9-03 222-2917-9-04 222-2917-9-05 222-2917-9-06 222-2917-9-07 222-2917-9-08 white black red blue yellow green orange gray light blue yes TM23P-8-BT 1 12 13.4 (12) (4) 25.3 (17.2) (16.9) 10.8 10.8 8.8 (6.5) ?6.8 (40) tm23p-88p protected lock/release lever ?6.8max b overview . dedicated boots for the tm23p-88p. . 9 color variations. . halogen-free. . protects the plugs lock/release lever. b boot installed 5 tm23 series cat 6 data wiring system connectors manual termination tool note: to achieve cat 6 performance, refer to tm23p-88p cable termination procedure manual(etad-e2415). solid copper conductor: 0.5mm dia. stranded copper conductor: awg#24 (0.95mm to 1.05mm) (5.4mm to 6.8mm) conductor individual conductor insulation dia. overall jacket dia. filler conductor insulation jacket recommended cable specification hrs marking side (for contact/conductor termination) a reverse side (for cable strain relief clamp crimping) part no. ht601-tm23/22p-88p 902-2128-1 cl no. * changing the a assembly parts to tm22 dedicated clamp parts will allow wiring of hiroses tm22p-88p plugs supporting cat 5e. body applicator item automatic contact termination machine cm-105 ap105-tm23p-88p part number cl901-0005-4 cl901-2588-5 cl no. cable strain relief clamp crimping jig (manual operated) tm23p-88p/ck-mp(01) part number cl902-2130-3(01) cl no. 6 tm23 series cat 6 data wiring system connectors note: the jack by itself does not clear cat 6 performance requirements. compensation on the board is required to secure cat 6 performance. jacks part number cl no. color rohs tm23r-5a-88(50) 222-2918-1-50 black yes b overview . unique contact structure designed for crosstalk reduction. . (through hole : 3 rows) . temporary retention to board with integral flexible posts. b pcb mounting pattern 1 2 3 4 5 6 7 8 15 6 connector front edge 1.016 3.048 5.08 7.112 1.3 2.54 4 recommended board thickness: 1.6mm 8-?0.8 2-?2.4 15 15 14.5 6 13 contact no. 8 contact no. 1 flexible post 0.43 4 2.54 1.3 3 2.1 0.35 7 tm23 series cat 6 data wiring system connectors precautions in system construction the tm23 series connector and components were designed for cat 6 data transfer. however, it is highly recommended that the entire connected system be checked for this performance level. cable termination procedures manufacturer's name web site hitachi cable, ltd. http://www.hitachi-cable.co.jp/index_e.html tonichi kyosan cable, ltd. http://www.tonichi-kyosan.co.jp/ nipponseisen co. ltd. http://www.nscable.co.jp/ okano electric wire co., ltd. http://www.okano-cable.co.jp/english/index.html tsushin kogyo k.k. http://www.tsuko.co.jp/ showa electric wire & cable co., ltd. http://www.swcc.co.jp/eng/index.html fuji electric cable co, ltd. http://www.tokyo-fuji.co.jp/index_f.htm recommended cable manufacturers hirose electric closely examines the transfer performance of these connectors with the cat 6 cable that is manufactured and sold by the various cable manufacturers. please use the cable from among those indicated in table 1 for system construction with the tm23 series. use of different manufacturers' components use of different manufacturers' components in one system could cause the deterioration of transfer performance. check of the system performance verification all measures have been taken to assure the transfer performance of the tm23 series. however, it is highly recommended to verify transfer performance of complete system using commercially available measuring instruments. hirose electric does not build wiring systems. please contact hirose electric sales representative for system construction contractor information. note: please see the web sites of the various manufacturers for cable specifications. contact hrs for recommendations when using cables from other suppliers. table1 recommended cable manufacturers cable termination procedure manual no. etad-e2415 tm23p-88p part number 8 tm23 series cat 6 data wiring system connectors dsp4300 main unit dsp4300 remote unit permanent link adapter (pm06) horizontal cable 90 m tm23r-mpp24 tm23r-t01 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value measured value measured value cat 6 attenuation standard value cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value . permanent links permanent link psacr frequency (mhz) dsp4300 main unit channel link adapter dsp4300 remote unit horizontal cable 90 m tm23r-mpp24 stranded wire 3 m patch cable 2 m tm23r-t01 ( :tm23p-88p) patch cable 5 m cat 6 psnext standard value measured value measured value cat 6 attenuation standard value 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value . channel links channel link psacr frequency (mhz) measured value cat 6 rl standard value 60 50 40 30 20 10 0 rl(db) 1 10 100 1000 measured value cat 6 rl standard value . patch cable patch cable 2 m rl frequency (mhz) measured value cat 6 next standard value 120 100 80 60 40 20 0 next(db) 1 10 100 1000 measured value cat 6 next standard value patch cable 2 m next frequency (mhz) dsp4300 main unit channel link adapter patch cable 2 m dsp4300 remote unit technical documentation cat 6 transmission characteristics data this is representative transfer performance for the tm23 series. a high margin is used for cat 6 standard values. the contents of this catalog are current as of date of publication. contents are subject to change without notice for the purpo se of improvements. 5-23,osaki 5-chome,shinagawa-ku,tokyo 141-8587,japan phone: 81-3-3491-9741, fax: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) 1 cat 6 data wiring system connectors tm23 series 2008.4 w features 1. high-speed data transfer conforms to the tia/eia-568b.2-1 data wiring standard, thereby clears cat 6 transfer performance requirements. as such, these products easily support gigabit ethernet (1000base-t/1000base-tx), which is the next generation of high-speed applications. 2. a product lineup focused on building of a complete system in addition to modular plugs, hirose electric offers box type outlets, patch panels, and wall outlets. systems built using all components from the same manufacturer will assure stable data transfer. 3. support of a wide variety of manufacturers' cat 6 cable to assure high performance of the system we test and monitor data transfer using cat 6 cables manufactured by different suppliers. 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value measured value measured value cat 6 attenuation standard value cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value permanent link psacr frequency (mhz) tm23 series cat 6 data wiring system connectors 2 100 m ohms min. no flashover or insulation breakdown. 230 m ohms max. no electrical discontinuity of 5s min. contact resistance : 250m ohms max. no electrical discontinuity of 5s. min. contact resistance : 250m ohms max. contact resistance : 250m ohms max. contact resistance : 250 m ohms max. insulation resistance : 100 m ohms min. contact resistance: 250 m ohms max. insulation resistance: 1 m ohms min. (high humidity) insulation resistance: 100 m ohms min. (dry state) contact resistance: 250 m ohms max. 100 v dc 500 v ac / one minute 100ma frequency: 10 to 55 hz, single amplitude of 0.75 mm, 1 octave/min. conduct, 10 cycles to each 3 directions. acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 6 axes. 200 cycles temperature : -553? ? +15? to +35? ? +852? ? +15? to +35? duration (minutes) : 30 ? 2 to 3 ? 30 ? 2 to 3 5 cycles 500 hours at temperature of 40 ? and humidity of 90% to 95%. 5% salt water/48 hours. 1. insulation resistance 2. withstanding voltage (between adjacent contacts) 3. contact resistance 4. vibration 5. shock 6. durability (mating/un-mating) 7. temperature cycle 8. humidity 9. salt spray rating current rating 1a voltage rating 125v ac operating temperature range -25 ? to +60 ? (note) plugs, boots specifications materials and finishes item specification conditions insulator contacts strain relief clamp polycarbonate phosphor bronze brass color: clear contact area: gold plated nickel plated ul94v-0 ------------------- ------------------- component plugs material finish remarks insulator eptr white (standard color) black, red, blue, yellow, green, orange, gray, light blue ul94v-0 ------------------- component boots material finish remarks note: includes temperature rise caused by current flow. ordering information plugs series name : tm23 connector type p : plug size 8 : 8 contacts inserted contacts 8p : 8 contacts 1 2 3 8p 8 - p - tm23 4 1 2 3 4 boots series name : tm23 connector type p : plug size 8 : 8 contacts bt : boot 1 2 3 bt 8 - p - tm23 4 1 2 3 4 +5 0 +5 0 jacks series name : tm23 connector type r : jack mounting style/termination type 5a : right-angle/through hole jack opening code 8 : for 8 contacts number of inserted contacts 8 : 8 contacts 1 2 3 4 5 8 8 5a - r tm23 1 2 3 4 5 3 tm23 series cat 6 data wiring system connectors plugs part no. tm23p-88p 222-2916-6 yes cl no. rohs tm23p-88p c6 1 (25) 24 5.4 10.05 10.05 6 17 (17.5) contact no. 1 connecter guide insert (shown inserted) contact no. 8 11.7 5.05 (12.9) 8.9 6.6 6.09 4.75 plug body connector guide insert * strain relief clamp * (15.45) b overview . contact configured for cat 6 performance. . 0.5 mm dia. solid wire or awg #24 stranded wire. . use with cables having external diameters of 5.4 mm to 6.8mm. . strain relief clamp protects the contact/conductor termination areas. b mated with corresponding receptacle (shown for reference only) * supplied separately(1bag contains 1pcs.) tm23 series cat 6 data wiring system connectors 4 boots part number cl no. color rohs TM23P-8-BT (01) TM23P-8-BT(01) TM23P-8-BT(02) TM23P-8-BT(03) TM23P-8-BT(04) TM23P-8-BT(05) TM23P-8-BT(06) TM23P-8-BT(07) TM23P-8-BT(08) 222-2917-9 -02 222-2917-9-01 222-2917-9-02 222-2917-9-03 222-2917-9-04 222-2917-9-05 222-2917-9-06 222-2917-9-07 222-2917-9-08 white black red blue yellow green orange gray light blue yes TM23P-8-BT 1 12 13.4 (12) (4) 25.3 (17.2) (16.9) 10.8 10.8 8.8 (6.5) ?6.8 (40) tm23p-88p protected lock/release lever ?6.8max b overview . dedicated boots for the tm23p-88p. . 9 color variations. . halogen-free. . protects the plugs lock/release lever. b boot installed 5 tm23 series cat 6 data wiring system connectors manual termination tool note: to achieve cat 6 performance, refer to tm23p-88p cable termination procedure manual(etad-e2415). solid copper conductor: 0.5mm dia. stranded copper conductor: awg#24 (0.95mm to 1.05mm) (5.4mm to 6.8mm) conductor individual conductor insulation dia. overall jacket dia. filler conductor insulation jacket recommended cable specification hrs marking side (for contact/conductor termination) a reverse side (for cable strain relief clamp crimping) part no. ht601-tm23/22p-88p 902-2128-1 cl no. * changing the a assembly parts to tm22 dedicated clamp parts will allow wiring of hiroses tm22p-88p plugs supporting cat 5e. body applicator item automatic contact termination machine cm-105 ap105-tm23p-88p part number cl901-0005-4 cl901-2588-5 cl no. cable strain relief clamp crimping jig (manual operated) tm23p-88p/ck-mp(01) part number cl902-2130-3(01) cl no. 6 tm23 series cat 6 data wiring system connectors note: the jack by itself does not clear cat 6 performance requirements. compensation on the board is required to secure cat 6 performance. jacks part number cl no. color rohs tm23r-5a-88(50) 222-2918-1-50 black yes b overview . unique contact structure designed for crosstalk reduction. . (through hole : 3 rows) . temporary retention to board with integral flexible posts. b pcb mounting pattern 1 2 3 4 5 6 7 8 15 6 connector front edge 1.016 3.048 5.08 7.112 1.3 2.54 4 recommended board thickness: 1.6mm 8-?0.8 2-?2.4 15 15 14.5 6 13 contact no. 8 contact no. 1 flexible post 0.43 4 2.54 1.3 3 2.1 0.35 7 tm23 series cat 6 data wiring system connectors precautions in system construction the tm23 series connector and components were designed for cat 6 data transfer. however, it is highly recommended that the entire connected system be checked for this performance level. cable termination procedures manufacturer's name web site hitachi cable, ltd. http://www.hitachi-cable.co.jp/index_e.html tonichi kyosan cable, ltd. http://www.tonichi-kyosan.co.jp/ nipponseisen co. ltd. http://www.nscable.co.jp/ okano electric wire co., ltd. http://www.okano-cable.co.jp/english/index.html tsushin kogyo k.k. http://www.tsuko.co.jp/ showa electric wire & cable co., ltd. http://www.swcc.co.jp/eng/index.html fuji electric cable co, ltd. http://www.tokyo-fuji.co.jp/index_f.htm recommended cable manufacturers hirose electric closely examines the transfer performance of these connectors with the cat 6 cable that is manufactured and sold by the various cable manufacturers. please use the cable from among those indicated in table 1 for system construction with the tm23 series. use of different manufacturers' components use of different manufacturers' components in one system could cause the deterioration of transfer performance. check of the system performance verification all measures have been taken to assure the transfer performance of the tm23 series. however, it is highly recommended to verify transfer performance of complete system using commercially available measuring instruments. hirose electric does not build wiring systems. please contact hirose electric sales representative for system construction contractor information. note: please see the web sites of the various manufacturers for cable specifications. contact hrs for recommendations when using cables from other suppliers. table1 recommended cable manufacturers cable termination procedure manual no. etad-e2415 tm23p-88p part number 8 tm23 series cat 6 data wiring system connectors dsp4300 main unit dsp4300 remote unit permanent link adapter (pm06) horizontal cable 90 m tm23r-mpp24 tm23r-t01 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value measured value measured value cat 6 attenuation standard value cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value . permanent links permanent link psacr frequency (mhz) dsp4300 main unit channel link adapter dsp4300 remote unit horizontal cable 90 m tm23r-mpp24 stranded wire 3 m patch cable 2 m tm23r-t01 ( :tm23p-88p) patch cable 5 m cat 6 psnext standard value measured value measured value cat 6 attenuation standard value 100 90 80 70 60 50 40 30 20 10 0 attenuation/psnext (db) cat 6 psnext standard value 1 10 100 1000 measured value measured value cat 6 attenuation standard value . channel links channel link psacr frequency (mhz) measured value cat 6 rl standard value 60 50 40 30 20 10 0 rl(db) 1 10 100 1000 measured value cat 6 rl standard value . patch cable patch cable 2 m rl frequency (mhz) measured value cat 6 next standard value 120 100 80 60 40 20 0 next(db) 1 10 100 1000 measured value cat 6 next standard value patch cable 2 m next frequency (mhz) dsp4300 main unit channel link adapter patch cable 2 m dsp4300 remote unit technical documentation cat 6 transmission characteristics data this is representative transfer performance for the tm23 series. a high margin is used for cat 6 standard values. the contents of this catalog are current as of date of publication. contents are subject to change without notice for the purpo se of improvements. 5-23,osaki 5-chome,shinagawa-ku,tokyo 141-8587,japan phone: 81-3-3491-9741, fax: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com
|
